package X3dForWebAuthors.Chapter09EventUtilitiesScripting;
/*
Copyright (c) 1995-2022 held by the author(s). All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
* Neither the name of the Web3D Consortium (https://www.web3d.org)
nor the names of its contributors may be used to endorse or
promote products derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
import org.web3d.x3d.jsail.Core.*;
import org.web3d.x3d.jsail.EnvironmentalEffects.*;
import org.web3d.x3d.jsail.EventUtilities.*;
import org.web3d.x3d.jsail.fields.*;
import org.web3d.x3d.jsail.Geometry3D.*;
import org.web3d.x3d.jsail.Grouping.*;
import org.web3d.x3d.jsail.Interpolation.*;
import org.web3d.x3d.jsail.Navigation.*;
import org.web3d.x3d.jsail.PointingDeviceSensor.*;
import org.web3d.x3d.jsail.Rendering.*;
import org.web3d.x3d.jsail.Shape.*;
import org.web3d.x3d.jsail.Time.*;
// Javadoc annotations follow, see below for Java source code.
/**
*
An IntegerSequencer node switches the display of colored cones near the pump house.
Related links: IntegerSequencerPumpHouse.java source, IntegerSequencerPumpHouse catalog page, X3D Resources, X3D Scene Authoring Hints, and X3D Tooltips.
This program uses the
X3D Java Scene Access Interface Library (X3DJSAIL).
It has been produced using the
X3dToJava.xslt
stylesheet to create Java source code from an .x3d
model.
* @author Todd Gagnon and Mark A. Boyd
*/
public class IntegerSequencerPumpHouse
{
/** Default constructor to create this object. */
public IntegerSequencerPumpHouse ()
{
initialize();
}
/** Create and initialize the X3D model for this object. */
public final void initialize()
{
x3dModel = new X3D().setProfile(X3D.PROFILE_INTERACTIVE).setVersion(X3D.VERSION_3_3)
.setHead(new head()
.addMeta(new meta().setName(meta.NAME_TITLE ).setContent("IntegerSequencerPumpHouse.x3d"))
.addMeta(new meta().setName(meta.NAME_DESCRIPTION).setContent("An IntegerSequencer node switches the display of colored cones near the pump house."))
.addMeta(new meta().setName(meta.NAME_CREATOR ).setContent("Todd Gagnon and Mark A. Boyd"))
.addMeta(new meta().setName(meta.NAME_TRANSLATOR ).setContent("Xeena VRML importer, X3D-Edit 3.1, https://www.web3d.org/x3d/content/README.X3D-Edit.html"))
.addMeta(new meta().setName(meta.NAME_CREATED ).setContent("8 June 1998"))
.addMeta(new meta().setName(meta.NAME_TRANSLATED ).setContent("20 December 2002"))
.addMeta(new meta().setName(meta.NAME_MODIFIED ).setContent("20 October 2019"))
.addMeta(new meta().setName(meta.NAME_REFERENCE ).setContent("KelpTank.x3d"))
.addMeta(new meta().setName(meta.NAME_REFERENCE ).setContent("https://X3dGraphics.com/examples/X3dForWebAuthors/KelpForestExhibit/PumpHouse.x3d"))
.addMeta(new meta().setName(meta.NAME_IDENTIFIER ).setContent("https://X3dGraphics.com/examples/X3dForWebAuthors/Chapter09EventUtilitiesScripting/IntegerSequencerPumpHouse.x3d"))
.addMeta(new meta().setName(meta.NAME_GENERATOR ).setContent("X3D-Edit 3.3, https://savage.nps.edu/X3D-Edit"))
.addMeta(new meta().setName(meta.NAME_GENERATOR ).setContent("Vrml97ToX3dNist, http://ovrt.nist.gov/v2_x3d.html"))
.addMeta(new meta().setName(meta.NAME_LICENSE ).setContent("../license.html")))
.setScene(new Scene()
.addChild(new WorldInfo().setTitle("IntegerSequencerPumpHouse.x3d"))
.addChild(new Background().setSkyColor(new MFColor(new double[] {1.0,1.0,1.0})))
.addChild(new Viewpoint().setDescription("Click pump house for next cone").setOrientation(-0.969,0.239,0.056,0.13).setPosition(1.66,1.34,5.95))
.addChild(new Group("PumpGeometry")
.addChild(new Transform().setScale(0.91,0.6,0.3).setTranslation(0.8,-0.65,0.5)
.addChild(new Shape()
.setAppearance(new Appearance()
.setMaterial(new Material().setDiffuseColor(0.749,0.694,0.651)))
.setGeometry(new Cylinder().setBottom(false).setTop(false))))
.addChild(new Group()
.addChild(new Shape()
.setAppearance(new Appearance("PumpHouseAppearance")
.setMaterial(new Material().setDiffuseColor(0.82,0.78,0.74)))
.setGeometry(new IndexedFaceSet().setCoordIndex(new int[] {0,1,5,4,-1,5,1,2,6,-1,6,2,3,7,-1,3,0,4,7,-1,1,12,13,2,-1,2,13,14,-1,12,15,16,13,-1,15,0,3,16,-1,16,3,17,-1,9,5,6,10,-1,8,9,10,11,-1,4,8,11,7,-1,4,5,9,8,-1,11,10,6,7,-1,3,2,14,17,-1,13,16,17,14,-1})
.setCoord(new Coordinate().setPoint(new MFVec3f(new double[] {0.0,0.0,0.0,2.0,0.0,0.0,2.0,1.75,0.0,0.0,1.75,0.0,0.625,0.75,0.0,1.0,0.75,0.0,1.0,1.6,0.0,0.625,1.6,0.0,0.625,0.75,-0.65,1.0,0.75,-0.65,1.0,1.6,-0.65,0.625,1.6,-0.65,2.0,0.0,-2.7,2.0,1.75,-2.7,2.0,2.5,-1.0,0.0,0.0,-2.7,0.0,1.75,-2.7,0.0,2.5,-1.0})))))
.addChild(new TouchSensor("PumpTouched").setDescription("touch to activate"))))
.addChild(new Transform().setTranslation(3.0,2.0,0.5)
.addChild(new Transform("ConeRotationTransform")
.addChild(new OrientationInterpolator("Rotator").setKey(new double[] {0.0,.33,.67,1.0}).setKeyValue(new MFRotation(new double[] {0.0,0.0,1.0,0.0,0.0,0.0,1.0,2.0,0.0,0.0,1.0,4.0,0.0,0.0,1.0,6.28})))
.addChild(new ROUTE().setFromNode("Rotator").setFromField("value_changed").setToNode("ConeRotationTransform").setToField("set_rotation"))
.addChild(new TimeSensor("Timer").setCycleInterval(2).setLoop(true).setStartTime(1))
.addChild(new ROUTE().setFromNode("Timer").setFromField("fraction_changed").setToNode("Rotator").setToField("set_fraction"))
.addComments(" positioning ROUTEs immediately following animation nodes helps keep track of event logic ")
.addChild(new Switch("Switcher").setWhichChoice(0)
.addChild(new Transform().setRotation(0.0,0.0,1.0,-1.05).setTranslation(0.0,-1.5,.5)
.addChild(new Shape()
.setAppearance(new Appearance()
.setMaterial(new Material().setDiffuseColor(1.0,0.0,0.0)))
.setGeometry(new Cone("b1").setBottomRadius(.5).setHeight(1))))
.addChild(new Transform().setRotation(0.0,0.0,1.0,-1.05).setTranslation(1.3,.75,0.0)
.addChild(new Shape()
.setAppearance(new Appearance()
.setMaterial(new Material().setDiffuseColor(0.0,1.0,1.0)))
.setGeometry(new Cone().setUSE("b1"))))
.addChild(new Transform().setRotation(0.0,0.0,1.0,1.05).setTranslation(-1.3,.75,-.5)
.addChild(new Shape()
.setAppearance(new Appearance()
.setMaterial(new Material().setDiffuseColor(1.0,1.0,0.0)))
.setGeometry(new Cone().setUSE("b1")))))
.addChild(new IntegerSequencer("Sequencer").setKey(new double[] {0.0,.33,.67,1.0}).setKeyValue(new int[] {0,1,2,-1}))
.addChild(new ROUTE().setFromNode("Sequencer").setFromField("value_changed").setToNode("Switcher").setToField("whichChoice"))
.addComments(" sending true event (on TouchSensor select) advances to next value, sending false event (on TouchSensor deselect) has no effect ")
.addChild(new ROUTE().setFromNode("PumpTouched").setFromField("isActive").setToNode("Sequencer").setToField("next"))))
.addChild(new Group()
.addChild(new Transform().setScale(0.5,0.5,0.5).setTranslation(1.0,1.1,-1.5)
.addChild(new Transform("PistonTransform")
.addChild(new PositionInterpolator("PistonPath").setKey(new double[] {0.0,0.3,0.32,0.5,0.75,1.0}).setKeyValue(new MFVec3f(new double[] {-0.4,-2.3,4.0,-0.4,-1.5,4.0,-0.4,-1.5,4.0,-0.4,-2.3,4.0,-0.4,-3.3,4.0,-0.4,-2.3,4.0})))
.addChild(new TimeSensor("PistonClock").setCycleInterval(5.5).setLoop(true))
.addChild(new ROUTE().setFromNode("PistonClock").setFromField("fraction_changed").setToNode("PistonPath").setToField("set_fraction"))
.addChild(new ROUTE().setFromNode("PistonPath").setFromField("value_changed").setToNode("PistonTransform").setToField("set_translation"))
.addChild(new Transform().setScale(1.8,1.2,0.6).setTranslation(0.0,-0.2,0.0)
.addChild(new Shape()
.setAppearance(new Appearance()
.setMaterial(new Material().setDiffuseColor(0.427,0.427,0.42)))
.setGeometry(new Cylinder().setHeight(1.0).setRadius(0.98))))
.addChild(new Transform("CylinderRod").setRotation(0.0,0.0,-1.0,0.523599).setTranslation(-0.25,0.75,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("PumpHouseAppearance"))
.setGeometry(new Cylinder().setHeight(1.0).setRadius(0.1))))
.addChild(new Transform().setRotation(0.0,0.0,1.0,1.047198).setTranslation(1.0,0.6,0.0)
.addChild(new Transform().setUSE("CylinderRod")))
.addChild(new Transform().setTranslation(0.0,1.2,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("PumpHouseAppearance"))
.setGeometry(new Sphere().setRadius(0.15))))
.addChild(new Transform("RockerArm1").setCenter(0.0,-0.4,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("PumpHouseAppearance"))
.setGeometry(new Cylinder().setHeight(1.8).setRadius(0.1)))
.addChild(new Transform().setTranslation(0.0,0.95,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("PumpHouseAppearance"))
.setGeometry(new Sphere().setRadius(0.15))))
.addChild(new PositionInterpolator("Rocker1Path").setKey(new double[] {0.0,0.3,0.32,0.5,0.75,1.0}).setKeyValue(new MFVec3f(new double[] {0.0,2.0,-0.25,0.0,1.8,-0.35,0.0,1.8,-0.35,0.0,2.0,-0.25,0.0,2.0,-0.12,0.0,2.0,-0.25})))
.addChild(new OrientationInterpolator("Rocker1Rotation").setKey(new double[] {0.0,0.3,0.32,0.5,0.75,1.0}).setKeyValue(new MFRotation(new double[] {-1.0,0.0,0.0,0.523599,-1.0,0.0,0.0,1.0471976,-1.0,0.0,0.0,1.0471976,-1.0,0.0,0.0,0.523599,-1.0,0.0,0.0,0.2617994,-1.0,0.0,0.0,0.523599}))))
.addChild(new Transform("RockerArm2").setCenter(0.0,0.7,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("PumpHouseAppearance"))
.setGeometry(new Cylinder().setHeight(1.8).setRadius(0.1)))
.addChild(new Transform().setTranslation(0.0,-0.95,0.0)
.addChild(new Shape()
.setAppearance(new Appearance().setUSE("PumpHouseAppearance"))
.setGeometry(new Sphere().setRadius(0.15))))
.addChild(new PositionInterpolator("Rocker2Path").setKey(new double[] {0.0,0.3,0.32,0.5,0.75,1.0}).setKeyValue(new MFVec3f(new double[] {0.0,1.95,-1.0,0.0,1.2,-1.6,0.0,1.2,-1.6,0.0,1.95,-1.0,0.0,2.2,-0.65,0.0,1.95,-1.0})))
.addChild(new OrientationInterpolator("Rocker2Rotation").setKey(new double[] {0.0,0.3,0.32,0.5,0.75,1.0}).setKeyValue(new MFRotation(new double[] {1.0,0.0,0.0,0.523599,1.0,0.0,0.0,0.4,1.0,0.0,0.0,0.4,1.0,0.0,0.0,0.523599,1.0,0.0,0.0,1.570796,1.0,0.0,0.0,0.523599})))))))
.addChild(new ROUTE().setFromNode("PistonClock").setFromField("fraction_changed").setToNode("Rocker1Path").setToField("set_fraction"))
.addChild(new ROUTE().setFromNode("Rocker1Path").setFromField("value_changed").setToNode("RockerArm1").setToField("set_translation"))
.addChild(new ROUTE().setFromNode("PistonClock").setFromField("fraction_changed").setToNode("Rocker1Rotation").setToField("set_fraction"))
.addChild(new ROUTE().setFromNode("Rocker1Rotation").setFromField("value_changed").setToNode("RockerArm1").setToField("set_rotation"))
.addChild(new ROUTE().setFromNode("PistonClock").setFromField("fraction_changed").setToNode("Rocker2Path").setToField("set_fraction"))
.addChild(new ROUTE().setFromNode("Rocker2Path").setFromField("value_changed").setToNode("RockerArm2").setToField("set_translation"))
.addChild(new ROUTE().setFromNode("PistonClock").setFromField("fraction_changed").setToNode("Rocker2Rotation").setToField("set_fraction"))
.addChild(new ROUTE().setFromNode("Rocker2Rotation").setFromField("value_changed").setToNode("RockerArm2").setToField("set_rotation")));
}
// end of initialize() method
/** The initialized model object, created within initialize() method. */
private X3D x3dModel;
/**
* Provide a
* shallow copy
* of the X3D model.
* @see X3D
* @return IntegerSequencerPumpHouse model
*/
public X3D getX3dModel()
{
return x3dModel;
}
/**
* Default main() method provided for test purposes, uses CommandLine to set global ConfigurationProperties for this object.
* @param args array of input parameters, provided as arguments
* @see X3D.handleArguments(args)
* @see X3D.validationReport()
* @see CommandLine
* @see CommandLine.USAGE
* @see ConfigurationProperties
*/
public static void main(String args[])
{
X3D thisExampleX3dModel = new IntegerSequencerPumpHouse().getX3dModel();
boolean hasArguments = (args != null) && (args.length > 0);
boolean validate = true; // default
boolean argumentsLoadNewModel = false;
String fileName = new String();
if (args != null)
{
for (String arg : args)
{
if (arg.toLowerCase().startsWith("-v") || arg.toLowerCase().contains("validate"))
{
validate = true; // making sure
}
if (arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_X3D) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_CLASSICVRML) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_X3DB) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_VRML97) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_EXI) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_GZIP) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_ZIP) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_HTML) ||
arg.toLowerCase().endsWith(X3D.FILE_EXTENSION_XHTML))
{
argumentsLoadNewModel = true;
fileName = arg;
}
}
}
if (argumentsLoadNewModel)
System.out.println("WARNING: \"X3dForWebAuthors.Chapter09EventUtilitiesScripting.IntegerSequencerPumpHouse\" model invocation is attempting to load file \"" + fileName + "\" instead of simply validating itself... file loading ignored.");
else if (hasArguments) // if no arguments provided, this method produces usage warning
thisExampleX3dModel.handleArguments(args);
if (validate)
{
System.out.print("Java program \"X3dForWebAuthors.Chapter09EventUtilitiesScripting.IntegerSequencerPumpHouse\" self-validation test results: ");
String validationResults = thisExampleX3dModel.validationReport();
if (validationResults.startsWith("\n"))
System.out.println();
System.out.println(validationResults.trim());
}
}
}